-
Multi-metal pretreatment for coil coating lines
-
No rinse system
-
Good wet adhesion and corrosion resistance
PrimeCoat MM13x-series is the productportfolio of PrimeCoat products that can be used as a pretreatment for coil coating lines (CCL). The MM13x-series is chromium (III) based and suitable for multi-metal applications.
Contact
Contact us for more information
+31 (0) 167 526 900
PrimeCoat® MM13x series are free of hexavalent chrome, water-based pretreatments for sheet metal, purposely developed to improve paint adhesion and bonding properties of the metal surface.
Aluminum, cold rolled steel and zinc alloy-coated steel pretreated with PrimeCoat® MM 13x products provide excellent durable bonding of coil-coating paints and adhesive bonding properties.
The bonding properties of PrimeCoat® MM13x products were tested in combination with several monolayer organic coatings after exposure in wet conditions like humidity test and immersion in boiling water.
When using an appropriate primer and topcoat the metal substrate pretreated with PrimeCoat® MM13x products will give comparable corrosion resistance with conventional no-rinse chromate pretreatments.
PrimeCoat MM13x products can be applied on:
- Zinc-coated steel
- Mg-Al-Zn coated steel
- Cold rolled steel
- Aluminium
PrimeCoat® MM13x-series benefits
- Multi-metal application
- Chromium(III) technology
- Improved paint adhesion and corrosion resistance properties
- Water-based chemistry
- REACH and ROHS compliant
- Suitable for a wide range of zinc alloys
Modular system
PrimeCoat® products are modular. This means that each product can be adapted to specific customer needs. based on a modular system. By changing the product concentration or adding specialty additives product properties can be enhanced. At a higher concentration PrimeCoat MM13x products could potentially replace a primer. Interested how? Contact us.
Ontdek meer
Voorbehandelen
De duurzaamheid en levensduur van producten zijn eisen die consumenten als vanzelfsprekend beschouwen. Er wordt continu verbetering verwacht op dit gebied. Verf hechting en corrosie weerstand zijn factoren waar rekening mee moet worden gehouden bij de conditie van applicaties tot en met de laatste levensduur van een product.
Passiveren
‘Witroest’; de vijand van verzinkt (band)staal stalen strips is een vorm van corrosie die kan optreden tijdens opslag. Een zeer onwenselijke vorm van corrosie voor kritische toepassingen in witgoed, bouw en andere high-end industrieën.
Thin Organic Coatings (TOC’s)
Thin Organic Coatings (TOC’s), worden in een doorlopend proces aangebracht op thermisch verzinkt staal en andere metalen ondergronden. Ook brengen deze veel voordelen met zich mee, zoals het tegengaan van vingerafdrukken en het verbeteren, vormen en toevoegen van corrosie protectie.
Reinigers en speciale additieven
Olie, vet en andere vormen van oppervlakte verontreinigingen die ontstaan gedurende productie moeten worden verwijderd. Afhangend van de soort verontreiniging, kan dit worden bereikt door middel van het gebruik van zuur of alkaline gebaseerde reinigers.
Smeermiddelversterkers
Smeermiddelversterkers verminderen de slijtage en werktuigvervuiling bij het produceren van metalen platen.